Subject :NSO Class : Class 4
Class : Class 6
Alright, so umm seriously the answer should be C also in the question Diagram Y. So, here it is cod liver oil which is semi-liquid = Half liquid and half solid. U can push it a little bit so the answer is C. In the book, it is turmeric powder and the answer is showing B too! I mean powder like seriously. The answer in the book should be D also in the book called Diagram Z. It is POWDER!!!!!!!!!!!!!!!!!!!! Like seriously Powder! They need to understand before writing the question in the book.
Class : Class 6
Dear friends, the answer is D. There has been an error by the SOF team. Cod liver oil is a liquid, so it will flow out. As diagram Z is showing precisely that, the answer is D.
Subject :NSO Class : Class 6
Post Your Answer
Subject :NSO Class : Class 6
Ans 1:
Class : Class 9
IT is not correct .... because they did not ask total number of poles ....it should be A {SIX}
Ans 2:
Class : Class 9
It is incorrect as there are six north poles and six south poles present in a magnet if it is broken into six pieces
Ans 5:
Ans 13:
Class : Class 8
it is wrong, see 12 is the sum of north and south poles but 6 should be the answer!!
Ans 14:
Class : Class 10
UTSAV C PATEL from Podar International School SHIVAMOGAClass;It is wrong answer as they did not ask the total number of poles
Post Your Answer
Subject :NSO Class : Class 6
Ans 1:
Class : Class 6
As north seeking pole is geographic south pole so R is north seeking pole. so , basically the south pole is the north seeking pole and as the north pole is facing downwards and starting with Q so south pole will be R . Hence, R is the north seeking pole and option C is the correct option.
Ans 2:
Class : Class 7
The answer is P as you can clearly see the iron rod should allow the magnetism to flow like what happens when you chain a nail, even though you are affecting only the top part the whole screw is affected hence proving the answer is wrong
Ans 3:
Class : Class 8
If you clearly notice, the arrow is first coming in contact with Part Q, and the arrow is above in Part P. First, the magnet comes in contact with part Q, so when the iron rod is magnetised, Part Q will be North pole.
Ans 6:
Class : Class 7
In the above process of magnetisation, the magnet makes its first contact with the iron rod on place R, so R would be the North pole of the magnetised iron bar.
Ans 7:
Class : Class 6
A IS TH CORRECT ANSWER. In the figure they started stoking the iron piece from point P which is the starting of the iron rod. so the correct answer is A.....
Ans 9:
Class : Class 9
At first, I also thought that it will be A but if you see the figure closely, you can see that the magnet first comes in contact with point Q, it is rubbed till R and is then lifted at R point. So, Point Q would be the north pole and the point R would be the south pole
Ans 11:
Ans 19:
Class : Class 7
Sorry R would be the south pole because of the reason:Q becomes the North pole, and R, where the magnet is lifted becomes the south pole.
Ans 20:
Class : Class 6
I didnt understand how it is R, can someone explain? Because according to me, the first point of contact is Q, but maybe that's not how it works....
Ans 21:
Ans 23:
Class : Class 8
it has started magnetising from Q SO THATS WHY IT IS TELLING THAT Q WILL BE THE NORTH SEEKING POLE.
Ans 25:
Class : Class 9
Yes it should be A ......because it is not possible that some of the iron bar is magnet and some is iron ....in the given figure starting of the stroke is point is Q but before that is point P which is starting of the rod so the CORRECT answer is A ..
Post Your Answer
Subject :NSO Class : Class 5
Post Your Answer
Subject :NSO Class : Class 3
Post Your Answer
Subject :NSO Class : Class 6
Post Your Answer
Subject :NSO Class : Class 6
Ans 3:
Class : Class 8
answer should be c as the wire is connecting to p and r ALSO IF THE FILAMENT IS BROKEN ONLY Q CAN NOT LIGHT UP.
Ans 6:
Class : Class 9
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd
Ans 7:
Class : Class 9
If the filament of bulb Q is fused then the circuit is not being completed because the electrons won't be able to reach the positive terminal as they would be stopped by the broken filament and electricity won't be able to pass through the filament to the negative terminal and due to the two cases that a circuit has to be completed for electricity to move and second one given it is proven that option 'B' is the correct option instead of 'A' 'C' or ' D'
Post Your Answer
Subject :NSO Class : Class 6
Post Your Answer
Subject :NSO Class : Class 5
Ans 1:
Class : Class 6
Due to the cooling effect of ice water, the air in the U-tube contracts, due to which the red ink X and Y move downwards.
Ans 3:
Class : Class 5
i had this correct but sof result is showing correct answer is d and i have writen d. BAD MALFUNCTION AND NEGATIVE MARKING IS THERE
Ans 9:
Class : Class 6
answer is d because due to the incoming air because of cold water if the water was hot then the ink drops would move up